Introduction

There are 2 ways to wash your car faster. The first option is to either do a waterless car wash or the second option is to do a 2-step touchless car wash. Both allow you to actually skip steps while attaining 80-95% effectiveness compared to a traditional hand car wash.

Waterless Car Wash Method:

A waterless car wash is a method of cleaning a car without using water. Instead of using a hose and bucket of water, a waterless car wash uses special cleaning products that are applied directly to the surface of the car and then wiped away with a microfiber towel. The cleaning products used in a waterless car wash typically contain a blend of surfactants, lubricants, and polymers that help to loosen and lift dirt and grime from the surface of the car without scratching it.

To use a waterless car wash, you will need a few key items, including:

1. A waterless car wash spray: This is the cleaning product that you will use to clean the car. It is usually applied to the surface of the car using a spray bottle.

   • Recommended Waterless Car Wash Spray: Optimum No Rinse

     • Link: https://amzn.to/3JKKFzi

2. Microfiber towels: You will need several microfiber towels to wipe away the cleaning product and buff the car to a shine.

   • Recommended microfiber towels: Chemical Guys Microfiber Towels

     • Link: https://amzn.to/3TTnPKh

3. A detailing brush: A detailing brush can be used to clean hard-to-reach areas like grilles, wheels, and emblems.

   • Recommended boar’s hair detail brush: Chemical Guys Boar’s Hair Detail Brush

     • Link: https://amzn.to/3TTOqH6

The process of using a waterless car wash is relatively simple. Here are the steps:

1. Spray the waterless car wash spray onto a section of the car's surface.

2. Use a microfiber towel to gently rub the surface, lifting and removing dirt and grime.

3. Use a second microfiber towel to buff the surface to a shine.

4. Repeat the process on the rest of the car's surface, working in sections.

A waterless car wash can be a convenient and effective way to clean your car without using water. It can be especially useful in areas where water is scarce or restricted like here in California, or when you don't have access to a hose and bucket. However, it's important to note that a waterless car wash may not be suitable for heavily soiled cars, as it may not be able to remove all of the dirt and grime. It can be done, but it’s usually faster to clean more soiled vehicles with pressurized water.

2-Step Touchless Car Wash

A 2-step touchless car wash involves the process of using 2 different soaps. One is usually a low pH acidic soap used as a presoak to neutralize negative ion charges. Then a 2nd soap that is a high pH is used to netrualize positive charges to make the whole vehicle panel neutrally charged which means the dirt will not hold onto to the panel any longer. Then you can pressure wash the area with 2500 to 3000 PSI water to remove the dirt and grime.

Here are the easily available products we recommend from Amazon:

• Image Wash Touchless 2 step concentrated System

  • Link: https://amzn.to/3ZlvBhf

Conclusion:

Both the waterless car wash method and the 2-step touchless car wash can significantly reduce the amount of time it takes to wash your car. These methods can decrease the time required by up to 50% compared to traditional hand washing methods.

Stay Shining San Diego!